What exactly is the difference between a surge protector and a fuse? Can a fuse protect the electronic devices from lightning instead of surge protector?
Last Updated: 19.06.2025 03:19

A circuit breaker is similar, but is resettable.
One is “what exactly is in a ‘surge protector’ ? ”
[old diagram got deleted by accident]
but I think this circuit , shows a few more pieces.
So, it’s possible that these devices from Trip Lite have addition suppression devices, these ones seem to be sturdy.
He then describes the function of a fuse.
Fatty liver: Symptoms and warning signs seen during the night - Times of India
But it can get overloaded, and no longer works.
It seems Mohan does not understand the difference between a comment and an Answer.
At the secondary, it is 1000 times less.)turns ratio). If it gets hit with a 100,000 volt bolt of lightning then the voltage arrestors conduct and clamp the voltage down to line voltage, ( but a small amount leaks down the line). This is the problem.
Why are white women so overly emotional?
nine
This is where this question deviates from being a 'generic' question, and becomes more specific.
“ … to protect building, lightning arrestor, is provided above building and directly connected to earth.”
I post the exact comment here.
An AC voltage/ current source, and an ac inductive load.
This is a photo where a lightning bolt took out a home's complete mains distribution box, and a lot of electronic gear as well.
Are there any guys, crossdressers, or transgender girls here who wear tampons?
If the nominal power is 4,000 watts then the current at 230volts is 16 amps.
2024–10–14 [Omar Gharbi Omar Gharbi ]
2024–10–16 [ OO OLAOYE OYEBODE ]
What are some examples of unofficial acts by presidents?
But… the neutral is now “floating” because of the 1 ohm resistance.
P = e* I, so since I is 16 amps, then the voltage dropped is 1/16 volt or 0.0650 volts.
There are two important concepts here.
This is a high voltage low current spike that comes down the line because of the power poles being struck, and the voltage suppressors activating on the primary side of the transformer.
2024–10–00 [ Ammar Mahdi ] Ammar Mahdi
It’s been three xxx five werks, and there has been no response to my follow on query on his Commment to my answer.
13 Cool New Gadgets to Keep on Your Radar - Gear Patrol
The bolt then partially travels down the line to your home.
First Sentence:
so, what happens?
What do men like to be given for their birthday?
So, the voltage could go up to 500 volts, and the fuse will not open up.
This one hit behind the barn.
Edit 2024–10.
Fuses, on their own, then operate much slower than the MOV variable resistance, during the lightning strike.
This is the picture of an electronic coil of wire wound around a core of magnetic material.
When the current is 200% of the rated value , it will “go open” (the link metal melts) and protect the device.
What are some of your favorite hip hop lyrics?
Because the load is inductive, the current lags the voltage.(by a bit).
The third is lightning and “how it gets conducted into a home.”
It also is a device that limits the change in current flow.
Once the voltage goes over 0.0650 volts, then this fact can be used to amplify the difference, and turn the circuit breaker off , furthur down the line. Essentially that is what a RCD/GFCI does, it compares the incoming current, to the outgoing current, and if the difference between the two currents is over 5mA, then it trips the circuit breaker.
He then asserts :
This device then solves the entire problem.
a photo is worth a thousand words.
These devices are installed between the “hot” and “neutral” and protective ground.
Would individual surge supressors have save this equipment? most likely, since the surge supressor would take the jolt instead of the electronic components.
the problem then depends on "how fast does the fuse operate?".
so, the loop of wire then, when put together with another loop reduces the ‘noise’ on a power line.
Here is a simplified AC power diagram.
This is an electronic circuit designed to clamp voltages so that the Voltage Potential that appears at the outlet is never going to exceed the nominal value.
Now when you have a certain ac resistance, then a current flows in a loop.
“ A surge suppressor is the one which is connected at the input supply so that when there is a sudden change voltage it bypasses thereby protecting the (circuit) and electronic components”
2024–09–27 [ Mohan Rajaratnam Mohan Rajaratnam ] . Thinks you can get free electricity from nothing : Mohan Rajaratnam's answer to Is it possible to generate free electricity at home using a magnet or other low-cost methods? If so, how does it work?
but this device (an Inductor) … impedes the rapid changes in the current.
Can the fuse protect the electronic devices from lightning instead of a surge protector.
2024–10–11 [Bobby Sanchez Bobby Sanchez ].
The MOV will conduct when the voltage exceeds 50% of line voltage.
Barnstars:
2024–10–10[John johnson John Johnson ]
“ A fuse is a device which protects the (circuit) against overload and short circuit.”
Lightning arrestor is a spark-gap device, and can be installed anywhere. What is important, is that the wire is thick enough to withstand the lightning bolt and conduct the energy away from the building.
Mohan forgets that a fuse is a one-time device, and needs to be replaced if it is tripped.
The other is “what does a “fuse” do?”
[image of Common-mode choke]
For this case there are devices called Metal oxide varistors (MOV).
What is lightning?
At least they know the answer if they wanted it.
But during the surge, the fuse will not blow if it is a longer duration and lower value )10 to 50%).
Upvotes:
One
what exactly is a ‘surge’ protector?
These are simplified answers to the original question, and does not change anything I wrote above.
At one ohm, the resistor has a maximum of 1 watt power.
This is 'the assistant's answer'
What does a fuse do?
So combined with a device called a MOV or Metal-oxide-resistor, then forms the 3rd part of a “surge suppressor “.
Is the question then , "why buy a surge supressor, if the fuse alone protects the electronic circuits from a lightning bolt?".
In schematic diagrams this is the symbol for a fuse:
(There is no concept of polarity, in the loop because the current changes direction 100 to 120 times a second (power frequency).
A fuse is a non-resetable over current circuit protector.
This is where the MOV conducts again, and dissipated the energy.
And this is the problem alone. Is the power supply in the equipmemt designed with a lightning strike in mind? Some yes, others, no.
He then describes Rainy Season and Lightning.
There are three different concepts here that are getting confused.
OK, this is Mohan Rajaratnam’s definition of a Surge suppressor.
There is no harm in having the surge suppressor along with the fuse in the circuit. The fuse will not open up until the current melts the link. This will take time, and in the interim, that jolt will get transmitted into the power supplies.
(Dc diagram shown, AC is similar).
eight
2024–10–11 [Victor Olarewsju Victor Olarewaju ]